Home
About Us
Our Products
Specifications
Shade Cards
Services
Feedback
Contact Us
 
 

Metallic Plastisol


Introduction:
Fabritex metallic plastisol inks are formulated to give a brilliant luster and a pure metallic effect after printing. The basic method of application and performance of all Fabritex plastisol inks is the same.  To obtain a better luster from metallic plastisol inks it is advised to use recommended reducers and additives.

 

Application:  Fabritex is for direct printing on cotton 100% or a polyester blend ranging from a white to a dark colour fabric. Mix the ink well before use. Recommended screen mesh is between 180 to 250 meshes. The choice of screen mesh depends upon the deposit and opacity required.     
Fabritex can be screen printed by a direct, indirect or capillary film.


Fusion:
145-155ºC


Wash up:
Mineral spirits, Fab-10.

 

Shade

Product Code

Rich Gold

11081

Pale Gold

11082

Rich Pale Gold

11083

Copper

11084

Silver

11085

Super Luster Silver

11086

 

Please Note:
1.The information above is as per the results obtained by in our laboratory. As the performance of the inks depends on the additives and the method of use therefore we recommend that the customer should test the suitability of our products before commencing mass production.
2.All colours are available in 1kg, 5kg and 25kg packing.

 

Home | About Us | Terms & Conditions | Privacy | Contact Us

Copyright © 2008 Vibrant Coatings Pvt.Ltd